TUTORIAL – Bracelet made of natural stones –

LEVEL : ★☆☆


Bracelet en perles naturelles

Equipment used:

  • 1 medium bangle bracelet
  • 1-wire cable golden
  • 1 mini puck in hematite galvanized
  • 1 ring junction 4mm
  • 1 charm small cactus in die-cast zinc
  • 2 crimps
  • 5 mini faceted 2mm hematite galvanized
  • 39 beads faceted 3mm indian agate

Steps of the realization :


Bracelet perles naturelles - Etape 1

Let's start with the simplest : the threading of the beads onto the wire cable. Insert as, in the middle of indian agate, the beads in hematite, gold, randomly. How would you rate the length relative to the support strap and adjust if needed by adding and removing one or two beads. Then, on each end, string a crimp bead.


Bracelet pierres naturelles - Etape 2

Lay the wire wired on the bracelet, zinc alloy. To do this : thread the lan cable, passing it through the crimp bead, so as to form a loop (tip : do not tighten too much, it is necessary that the loop is a little mobile to not freeze the pearl bracelet). Gently press the crimp bead using flat pliers to solidify, and iron wire wired in the few pearls that follow. Cut the wire flush to the aid of a pliers. Do the same on the other side.

Bracelet perles naturelles - Etape 3

Last small step to complete your bracelet with a little touch of whimsy : charm cactus. On one side, with a ring junction 4mm, and flat pliers. Your beautiful bracelet is now finished ! Please don't hesitate to vary the colors and the stones, here are some examples of associations : lapis lazuli/gold , onyx/black gold pink rose quartz/silver, amazonite/silver ...

Tutorial made by Stephanie of MyLittleBird