TUTO – cuff Bracelet leather –
LEVEL : ★☆☆
Equipment used (Budget: 15 €):
Steps of the realization :
Cut the strands to the desired length (including the clasp). The best is to check the length by making a "pre-assembly" without paste, with the clasp around your wrist. For info, the strands of a wrist of medium size 16-17cm.
Insert the passers-by : on the small, 1 strand / on the large, 2-ply . Place the grossierement in their place : they coulisseront of all ways after.
Drop in the bottom of the clasp a little bit of glue : proportion so as to be just sufficient to ensure that all the strands can be glued and do not put too much on, it's going to overflow. I use the Hasulith (convenient, since rather thick, so its easy to remove if the glue deborde a little), or the UHU super Glue (handy as very fast to make, no need to wait for a night - but at the risk of bleach where it has overflowed)
If it overflows a bit (almost inevitable ;) ) : remove away the excess glue with the tip of a toothpick for example, to avoid spread the more possible.
Complete the bonding of the other part of the clasp.
Let it dry (according to the manufacturer's recommendations)... It is finished !